top of page

Parent teacher association

Public·67 members
Akbar Shashkov
Akbar Shashkov

Wanscam Software Ocx Setup Downl: What You Need to Know Before Downloading and Installing It



Wanscam Software Ocx Setup Downl: How to Install and Use It




If you are looking for a reliable and easy-to-use software for accessing, browsing and recording streaming content from your Wanscam IP cameras, you might want to check out Wanscam Software Ocx. In this article, we will show you what Wanscam Software Ocx is, how to download and install it, and how to use it for streaming and recording video from your Wanscam IP cameras.




Wanscam Software Ocx Setup Downl



What is Wanscam Software Ocx?




A brief introduction to Wanscam Software Ocx and its features




Wanscam Software Ocx is a free application that allows you to browse and watch streamed content on your PC. The software supports local and Internet connected camera devices, including the ones from Wanscam, a leading manufacturer of IP cameras, network video recorders, solar cameras, baby monitors, etc.


Some of the main features of Wanscam Software Ocx are:



  • P2P support: You can access your IP cameras without configuring any port forwarding or DDNS settings on your router.



  • IP address access: You can also access your IP cameras by entering their IP addresses directly.



  • Speaker: You can communicate with the people or animals in front of your IP cameras through the built-in speaker function.



  • Local record: You can save the video streams from your IP cameras on your local hard drive.



  • Alarm record: You can set up motion detection or sound detection alarms on your IP cameras and record the video clips when the alarms are triggered.



  • SD card record: You can also record the video streams from your IP cameras on their SD cards if they have one.



The benefits of using Wanscam Software Ocx for streaming and recording




By using Wanscam Software Ocx, you can enjoy the following benefits:



  • Easy installation and setup: You don't need any technical skills or complicated procedures to install and use Wanscam Software Ocx. Just download it from the official website or other sources, run it on your PC, and connect your IP cameras with it.



  • High compatibility: Wanscam Software Ocx works fine with 32-bit and 64-bit versions of Windows XP/Vista/7/8/10/11. It also supports various models of Wanscam IP cameras, such as HW0029, HW0036, HW0045, etc.



  • Flexible control: You can adjust the settings of your IP cameras, such as resolution, frame rate, brightness, contrast, etc., through Wanscam Software Ocx. You can also pan, tilt, zoom, or flip your IP cameras remotely.



  • Multiview display: You can view up to 64 channels of video streams from different IP cameras simultaneously on one screen. You can also switch between different display modes, such as full screen, split screen, or picture-in-picture.



  • Secure encryption: You can protect your privacy and security by using encryption methods such as HTTPS or SSL when accessing your IP cameras through Wanscam Software Ocx.



How to download Wanscam Software Ocx?




The official website and other sources for downloading Wanscam Software Ocx




The easiest way to download Wanscam Software Ocx is to visit the official website of WANSCAM, where you can find the latest version of the software along with other useful resources such as user manuals, firmware updates, FAQs, etc. You can also scan the QR code on the product package or user manual of your IP camera to download the software directly.


Besides the official website, you can also download Wanscam Software Ocx from other sources such as Free Download Manager, Software Informer, UpdateStar, etc. However, you should be careful about the authenticity and security of these sources before downloading anything from them.


The system requirements and compatibility of Wanscam Software Ocx




Before downloading and installing Wanscam Software Ocx, you should make sure that your PC meets the minimum system requirements for running the software smoothly. According to the official website, these are:



  • CPU: Intel Pentium IV 1.8GHz or above



  • RAM: 256MB or above



  • HDD: 40GB or above



  • OS: Windows XP/Vista/7/8/10/11 (32-bit or 64-bit)



  • Network adapter: Ethernet card or wireless card that supports TCP/IP protocol



  • Display adapter: VGA card that supports DirectX9.0c or above



  • Sound card: Standard sound card that supports Windows multimedia functions



  • Web browser: Internet Explorer 6.0 or above (with ActiveX plugin enabled)



  • Other software: Microsoft .NET Framework 4.0 or above (for Windows XP users)



In addition, you should also check the compatibility of your IP camera model with Wanscam Software Ocx before downloading it. You can find a list of supported models on the official website or in the user manual of your IP camera.


How to install Wanscam Software Ocx?




The steps for installing Wanscam Software Ocx on Windows PC




After downloading Wanscam Software Ocx from a reliable source, you can follow these steps to install it on your Windows PC:



Double-click on the downloaded file (wans_cam_client_1_0_0_13_en.rar) to extract it. You will get a folder named w_cam_client_1_0_0_13_en.


About

Welcome to the group! You can connect with other members, ge...

Members

logo-01.png
bottom of page